Danfoss APP 11-13
The pumps are based on the positive displacement principle (axial piston design) which enables a very light and compact design, and they are designed so that the lubrication of the moving parts in the pumps is provided by the fluid itself. No oil lubrication is thus required.
Classification:
Consumables and equipment
Commercial Water Pumps
Danfoss Pumps
Keywords:
Danfoss Pumps
DESCRIPTION
- DESCRIPTION
- INTRODUCTION
- CASE
-
Product Description：
Uses for Danfoss APP 11-13
The pumps are based on the positive displacement principle (axial piston design) which enables a very light and compact design, and they are designed so that the lubrication of the moving parts in the pumps is provided by the fluid itself. No oil lubrication is thus required.The pumps are supplied with an integrated flushing valve that allows the salt water to flow from inlet to the outlet, when the pump is not running.
All parts included in the pumps are designed to provide long service life, i.e. long service life with a constantly high efficiency and minimum service required. The pumps are fixed displacement pumps in which the flow is proportional to the number of revolutions of the input shaft and the pump displacement.
Models：
APP Pumps
APP 11 / 1200
APP 11 / 1500
APP 13 / 1200
APP 13 / 1500
Code number
180B3212
180B3211
180B3214
180B3213
Geometric displacement
cm³/rpm
166
137
197
166
in³/rpm
10.1
8.4
12
10.1
Rated flow at max. speed 1)
m³/h
11
11.1
13.1
13.5
gpm
48.4
49
57.7
59.3
Outlet min. pressure 2)
bar
30
30
30
30
psi
435
435
435
435
Outlet max. pressure, cont. 3)
bar
80
70
80
70
psi
1160
1015
1160
1015
Inlet min. pressure
bar
2
2
2
2
psi
29
29
29
29
Inlet max. pressure, cont.
bar
5
5
5
5
psi
72.5
72.5
72.5
72.5
Inlet max. pressure, peak
bar
10
10
10
10
psi
145
145
145
145
Max. speed cont.
rpm
1200
1500
1200
1500
Min. speed cont.
rpm
700
700
700
700
Power requirement at max. speed and 60 bar outlet pressure
kW
23
24
27
29
hp
30.8
32.2
36.2
38.9
Torque at 60 bar outlet pressure
Nm
179
148
212
179
lbf-ft
132
109
157
132
Weight
Kg
75
75
75
75
lb
165
165
165
165
Integrated flushing valve
YES
YES
YES
YES
Features：
•One of the smallest and lightest pumps on the market.
•Can be powered by a combustion engine.
•Long service life / No preventive maintenance required in the warranty period.
•Generates insignificant pulsations in the high-pressure line.
•No oil lubricant required.
•Integrated flushing valve
•All parts of the pump are made of high corrosion resistant materials e.g. Duplex (EN1.4462/UNS S31803-S32205) and Super Duplex (EN1.4410/UNS S32750) stainless steel and carbon reinforced PEEK.
•High efficiencyApplications：
•Desalination systems
•Reverse Osmosis System
•Filtration SystemDocs：
Danfoss APP 11-13 Data Sheet
Videos：
Reviews：
☆☆☆☆☆ (1 review) Write a Review
☆☆☆☆☆
Excellent deal
Posted by Majid G. on Mar 13th 2019Great customer support in handling these membranes!
INTRODUCTION
CASE
Previous Page : Danfoss APP 1.5-3.5
Next page : CAT ATEX Pumps
Project
Related products
Cat Pumps offers a range of belt-driven pumps from 0.13 GPM up to 240 GPM. Belt-drive is a very popular option because of the flow flexibility given within pulley ratios. Using a belt-drive isolates the pump from the heat and vibration of the motor or engine driving the pump. The belt also isolates shock from an engine or motor on start up, which can put excess wear on the crankshaft and drive end components. Belt-drive pumps give the flexibility of changing pump flow by a simple pulley change.
Cat Pumps gearbox pumps are direct-drive high-pressure pumps that can be easily mounted on standard gas or diesel engines up to 24 horsepower. The gearbox drive has a 2 to 1 ratio allowing the pump to run at half the speed of the engine. This configuration provides a compact assembly without running the pump at high engine RPM. The gearbox is completely sealed, offering protection against rain, dust, and humidity. Cat Pumps gearbox pumps are #1 in commercial-duty pressure washers due to superior product life and ability to perform well in continuous duty use.
Webtrol HT-Series Booster Pumps
The Webtrol HT Series is the original HeavyDuty Booster Pump, designed for high flow athigh head. The HT Series Booster Pumps arebuilt to withstand the rigorous demands generatedthrough use in the Reverse Osmosis,Deionization, Car wash, Washdown and BoosterLift Station applications, as well as various otherIndustrial and Agricultural uses.
Online Message
Filing in your phone and E-mal information willhelp us to get in touch with you in time and solve your problems as soon as possible.
Contact
E-mail：sales@jujinro.com
WhatsApp：+85365801640
ADD：Workshop 29, Liandong U Valley
No. 60 Lianchou Road, Nanning City
Guangxi Zhuang Autonomous Region, China
Ava Lu
Powered by www.300.cn SEO