Air-E-Tainer® Diaphragm Tanks
Vertical, Horizontal and Inline Well System Tanks • Inline tanks pre-charged for 30-50 pressure switch • Vertical tanks pre-charged for 40-60 pressure switch • 100 PSI maximum working pressure
Classification:
Consumables and equipment
Commercial Water Pumps
Flint And Walling Pumps
Keywords:
Danfoss Pumps
DESCRIPTION
- DESCRIPTION
- INTRODUCTION
- CASE
-
Product Description：
Vertical, Horizontal and Inline Well System Tanks
•Inline tanks pre-charged for 30-50 pressure switch
•Vertical tanks pre-charged for 40-60 pressure switch
•100 PSI maximum working pressure
•Powder-coated exterior and interior
•Butyl rubber parabolic diaphragm
•5 year limited warrantyModels：
Part No.
Total Tank Vol.
Gallons
Drawdown - Gallons by
PSI Settings***
Approx. Size In.
Dia x Ht
Ship Wt
Lbs
NPT Size/ MTL
Factory
Precharge
PSIG
Max Working
Pressure (PSI)
Max Working
Temp
20/40
30/50
40/60
131009
2
0.7
0.6
8-1/4 x 10-1/5
5
3/4” M
28
100
140
132477
4.6
1.6
1.4
11 x 14-3/4
9
3/4” M
28
100
140
132661
14
5.2
4.3
3.7
15-3/8 x 24-3/4
25.5
1” F
38
100
200
136878A*
14
5.2
4.3
3.8
15-1/3 x 16-7/10
28
3/4” M
28
100
200
132662
20
7.4
6.2
5.4
15-3/8 x 32-1/4
30
1” F
38
100
200
132663
36
13.3
11.1
9.7
20 x 38-5/8
45
1” F
38
100
200
133517
52
19.2
16.1
14
23-3/8 x 38-5/8
77
1-1/4” F
38
100
200
136875
65
23.9
20
17.5
23-3/8 x 46-3/5
87
1-1/4” F
38
100
200
135460
86
31.8
26.7
23.2
23-3/8 x 59
105
1-1/4” F
38
100
200
136876
119.5
44
37
32
26 x 61-1/4
165
1-1/4” F
38
100
200
Features：
1. AIR CHARGE VALVE
•Conveniently located for easy pressure adjustment
•Projection-welded for durability
2. DESIGNER FINISH•High gloss exterior powder coat
•Provides positive protection against corrosion and UV rays
3. BUTYL RUBBER PARABOLIC DIAPHRAGM•Eliminates rubbing on the tank wall or rolling over on itself
4. STEEL SHELL5. STEEL RETAINING RING
6. POWDER-COATED WATER CHAMBER
•Proven protection against internal corrosion
7. CORROSION-RESISTANT BASE•High-impact polymer material
•Strong and stable for long life
•Base rotates for easy alignment to pipe connection
•Slotted and noted for air flow, reduced condensation buildup
*With pump stand.***In keeping with current industry standards, drawdown factors are based on Boyle’s law. Actual drawdowns will vary depending upon system variables, including the accuracy
and operation of the pressure switch and gauage and operating temperature of the system.
Caution: install a pressure relief valve on any installation where the pump pressure can exceed the tank’s maximum working pressure.
NOTE: Precharged tanks cannot ship via air freight.Applications：
•Horizontal or vertical applications
Docs：
Air-E-Tainer Diaphragm Tanks Data Sheet
Videos：
Reviews：
☆☆☆☆☆ (1 review) Write a Review
☆☆☆☆☆
Produces high quality water
Posted by Gildo Q. on Aug 19th 2018Will buy these these tanks again!
INTRODUCTION
CASE
Previous Page : EK Shallow Well Jet Pump Tank Mounted System
Next page : Danfoss APP 0.6-1.0
Project
Related products
Cat Pumps offers a range of belt-driven pumps from 0.13 GPM up to 240 GPM. Belt-drive is a very popular option because of the flow flexibility given within pulley ratios. Using a belt-drive isolates the pump from the heat and vibration of the motor or engine driving the pump. The belt also isolates shock from an engine or motor on start up, which can put excess wear on the crankshaft and drive end components. Belt-drive pumps give the flexibility of changing pump flow by a simple pulley change.
Cat Pumps gearbox pumps are direct-drive high-pressure pumps that can be easily mounted on standard gas or diesel engines up to 24 horsepower. The gearbox drive has a 2 to 1 ratio allowing the pump to run at half the speed of the engine. This configuration provides a compact assembly without running the pump at high engine RPM. The gearbox is completely sealed, offering protection against rain, dust, and humidity. Cat Pumps gearbox pumps are #1 in commercial-duty pressure washers due to superior product life and ability to perform well in continuous duty use.
Webtrol HT-Series Booster Pumps
The Webtrol HT Series is the original HeavyDuty Booster Pump, designed for high flow athigh head. The HT Series Booster Pumps arebuilt to withstand the rigorous demands generatedthrough use in the Reverse Osmosis,Deionization, Car wash, Washdown and BoosterLift Station applications, as well as various otherIndustrial and Agricultural uses.
Online Message
Filing in your phone and E-mal information willhelp us to get in touch with you in time and solve your problems as soon as possible.
Contact
E-mail：sales@jujinro.com
WhatsApp：+85365801640
ADD：Workshop 29, Liandong U Valley
No. 60 Lianchou Road, Nanning City
Guangxi Zhuang Autonomous Region, China
Ava Lu
Powered by www.300.cn SEO