Danfoss APP 11-13

The pumps are based on the positive displacement principle (axial piston design) which enables a very light and compact design, and they are designed so that the lubrication of the moving parts in the pumps is provided by the fluid itself. No oil lubrication is thus required.

CAT ATEX Pumps

For pumping applications located in potentially explosive atmospheres, Cat Pumps offers a complete line of pumps that meet the ATEX 2 directive for such environments. Pump compliance to the ATEX directives is common in industries such as petrochemical, chemical, oil & gas, and bio-fuels.

CAT Belt Drive Pumps

Cat Pumps offers a range of belt-driven pumps from 0.13 GPM up to 240 GPM. Belt-drive is a very popular option because of the flow flexibility given within pulley ratios. Using a belt-drive isolates the pump from the heat and vibration of the motor or engine driving the pump. The belt also isolates shock from an engine or motor on start up, which can put excess wear on the crankshaft and drive end components. Belt-drive pumps give the flexibility of changing pump flow by a simple pulley change.

CAT Gearbox Pumps

Cat Pumps gearbox pumps are direct-drive high-pressure pumps that can be easily mounted on standard gas or diesel engines up to 24 horsepower. The gearbox drive has a 2 to 1 ratio allowing the pump to run at half the speed of the engine. This configuration provides a compact assembly without running the pump at high engine RPM. The gearbox is completely sealed, offering protection against rain, dust, and humidity. Cat Pumps gearbox pumps are #1 in commercial-duty pressure washers due to superior product life and ability to perform well in continuous duty use.

Webtrol HT-Series Booster Pumps

The Webtrol HT Series is the original HeavyDuty Booster Pump, designed for high flow athigh head. The HT Series Booster Pumps arebuilt to withstand the rigorous demands generatedthrough use in the Reverse Osmosis,Deionization, Car wash, Washdown and BoosterLift Station applications, as well as various otherIndustrial and Agricultural uses.

Webtrol Cast Iron Centrifugal Pumps

Webtrol’s Centrifugal Pumps are close coupled end suction centrifugal pumps. They are excellent choices for a wide variety of pumping applications such as irrigation for farms, lawn sprinklers, pressure boosting and circulation pumps for hot water or glycol. The Webtrol Centrifugal Pump is a rugged thick wall cast iron design, built to withstand continuous use under the most severe conditions. When water needs to be moved from one place to another, look to the Webtrol Centrifugal Pumps to do the job and do it right.

Webtrol Convertible Jet Pumps

The rapid, self priming Webtrol Convertible Jet Pump is truly a multi-purpose pump for your home, farm, commercial or industrial use. Webtrol’s Convertible Jet Pumps can be used in several ways. When used as a shallow well Jet Pump, the injector is attached to the pump case, which will enable you to retrieve water from depths of 25 ft. or less with a single 1” pipe. For a deep well installation of 80 ft. or less in a 4 inch dia. well, a double pipe suction arrangement is used. For the times when you need a small pressure boost of 20 to 60 psi, use a Webtrol Convertible Jet Pump and you won’t be disappointed.

Webtrol FC Centrifugal Pumps

The Webtrol Pro-Stainless Steel Series Centrifugal are designed for dependable performance and rugged continuous duty service. When you need a corrosion and erosion resistant pump, the Pro-Stainless Steel Centrifugal line of pumps from Webtrol is your logical choice. These pumps are guaranteed tough, engineered for the professional and built for lasting performance and value.

Webtrol PC Series Centrifugal Pumps

The Webtrol PC Series Centrifugal is built forthe professional who is committed to quality andcustomer satisfaction.The Webtrol PC Series Centrifugal iscompletely corrosion resistantthrough the use of 316 stainlesssteel and high impact, glassreinforced Noryl. The compact,light weight design of the PCSeries Centrifugal makes itideal for cabinet installationas well as skid mounting.To insure that you have no problemsat start-up and throughout the operationof the pump, every complete pump is thoroughlytested for performance, electrical draw,noise and vibration.

Webtrol High Head 2 Stage SS Centrifugal Pumps

The Webtrol Stainless Steel Series Centrifugal are engineered and built for the professional who is interested in quality features and long lasting performance, dependability and value. Design for the applications where a one stage centrifugal just can’t develop the head or pressure needed for the job. These 2 Stage centrifugals deliver smooth, steady performance day after day at high efficiencies which means lower operating cost for you. To insure that you have no problems at startup and throughout the operation of the pump, every complete pump is thoroughly water tested for performance, electrical draw, noise and vibration.

Pulsafeeder PULSAtron Series A Plus

Ten distinct models are available, having pressure capabilities to 250 psig (17 bar), and flow capacities to 58 gpd (9.1 lph), with a turndown ratio of 100:1. Metering performance is reproducible to within +/- 3% of maximum capacity.

Pulsafeeder PULSAtron Series C

Four distinct models are available, having pressure capabilities to 80 psgi (5.6 bar), and flow capacities to 30 gpd (4.7 lph), with a turndown ration of 10:1. Metering performance is reproducible to within +/- 3% of maximum capacity. Our guided check valves, with their state-of-the-art seat and ball designs, provide precise seating, and excellent priming and suction life characteristics. Out timing circuit is highly reliable and, by design, virtually unaffected by temperature, EMI and other electrical disturbances.